Providing a range of Python software for the Telit family of embedded hardware modules.
Product Box Showing Living Room and Mobile Phone

GPIO SMS Remote Control and Monitoring Software

The GPIO software allows the user to remotely control (via the GSM Network) physically connected hardware e.g. turn lights on/off via SMS message sent from a mobile/cell phone or any other means that can send SMS messages (e.g. via server side software using an SMS Gateway such as provided by

It can also signal changes in state e.g. switch or sensor turned on / off via SMS message back to a pre specified telephone number.

Suitable for use in a range of applications including:

  • Home Automation
  • Alarms / Security
  • Monitoring and Control

The GPIO software is controlled via the use of SMS Command messages, these are standard text messages send via a mobile phone however they are formatted in a specific way that instruct the GPIO software to perform a set action, such as turning an output on or off.

For the full SMS command list see the manual. For information on connecting the physical devices to the EZ863 / GE863 hardware see the EZ863 / GE863 guide to using GPIOs.


Volume Licensing Costs

Qty. Cost (£ GBP per license)
1-4 25.00
5-9 20.00
10-24 12.00
25-49 6.00
50-99 4.00
100+ POA

Note: Volume licensing costs are not yet finalised and subject to change.


To purchase in volume or for further information please email.

To purchase a single copy of the software use the PayPal button below (credit cards accepted).

Hardware Distributors

Telit module compatable hardware is available from: Sequoia (inc. Modules, contact Paul Gibbons +44 118 976 9000), M2M Platforms, Glyn (contact Mike Benson), Area SX s.r.l., RF Design.